In many homes, there are many areas with ceramic tile. Maybe it’s your shower, the bathroom sink or floor. It could be your kitchen counters, the kitchen floor, your backsplash, or even the voice. Ceramic tiles are beautiful and affordable. But what happens if your area has a tile beautifully broken tiles? Here is a simple article on how to replace the broken tile.
Required materials / tools:
Grout Saw
Latex tile adhesive
Hammer
Chisel
Spatula to apply the adhesive
Trowel / trowel for the application of malta
Sponge
Corresponding tile replacement
Correspondence malta
The first thing to do is take one might add. Seen through the tile along all sides of the tile. This should be easy enough, but try not to cut the tiles in other surrounding Malta.
Then you need to break the tiles. You can do this by placing a chisel at the top of the tile and hitting the end of the chisel with the hammer. If the pieces back, the effect of new tiles, giving wrong with the other.
Once the old tiles and glue old, you will receive your new card. I also saw some creative people, creating a new model if the same kind. For example, if all tiles are colored blue, but does not and can not find an exact match, you can replace the tile, and after every third tile, with a dark blue.
Now the latex adhesive coated on the back of the tile replacement with a spatula, trying your best to not evenly distributed. Place the tile down into the void that was created, where it will go.
Finally, spread your grout joints around the tile, remove the excess with a damp sponge. Again, you want the rest of Malta for Malta as close as possible to come closer. Enjoy your new tile ceramic and try to avoid touching it for 24 hours, and when it dries.